Formatting Autoresponder Messages

Have you received emails that were all broken up?
These emails have one or two words on one line,
then eight or ten words on the next line. In some
cases, one word begins on one line and ends on the
next. These emails are very hard to read, and they
appear to be very unprofessional. Is this what you
want your autoresponder email messages to look
like?

If not, you need to learn how to format your
messages. Start by reading the instructions for your
specific autoresponder. Each one operates a bit
differently in the way that it handles text. For
instance, some autoresponder messages will be
messed up if you do put a ‘hard line break’ at the
end of each line, while others will be messed up if
you don’t! Find out what the right option is for your
autoresponder!

Because each email client is different, you should
not allow any line in your message to exceed 65
characters. This will help prevent lines from breaking
up, and it is achieved by hitting the ‘enter’ key at
the end of each sixty-five character line. The best
way to be sure that your autoresponder messages
are delivered in the correct format is to send them
to yourself, before you send them to your list!

Article Source: http://www.a1-articledirectory.com

John Ugoshowa. For more information about auto responders see the auto responder section of The Free Ad Forum at: www.thefreeadforum.com/infowizards/SUB/Auto-Responders_104_1.html

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated